Safety Features and Advice for our Climbing Frames

• All our Climbing Frame and Swing Set Products comply with European Safety Standards EN71- 1, EN71-3, EN71-8, and EN71-9.
• All spacings are calculated and angles are designed so that children don't get trapped.
• Swings have been tested using 200kg static weights.
• Angled Ladders, with anti-slip grooved rungs, for safer and easier climbing.
• Bridges have three rails on each side, including a kick plate to prevent children from slipping off the side if they fall over.
• A-Frame cross braces are bolted on, not screwed, for extra rigidity.
• Nuts and Bolts are capped to reduce the risk of fingers getting trapped or clothing getting caught on them.
• All sides, except access points, are fully enclosed to prevent falling and avoid entrapment of limbs in any gaps.
• Do not allow children to use the monkey bars whilst another child is using the swing or ringtrapeze.
• Swings and ringtrapeze must not be used at the same time as each other.
• For residential use only.
• Do not position over hard surfaces or near to any water hazards.
• Place on a level surface at least 2m from any structure or obstruction to provide a safe play perimeter around the Play System.
• Do not modify your Play System as this may affect its function and will void your warranty.
• Only to be used under Adult Supervision.
• Ground Anchors are supplied, and must be used. Additional Ground Anchors are available if you wish to give your play system more stability.