The Carsare A is the perfect place to chill out, wind down after a hard day at work. Escape from the noisy kids and the chaos of life to your quite retreat with nothing but the beautiful surroundings of your back garden. Sit back and relax in the sun listening to the sounds of birds, the buzzing of bees, or the rhythm of rain and crashing of thunder. Whatever the weather your beautifully crafted cabin is the place you will want to be. All our cabins are manufactured from sustainable resources.

Designed to retain and reflect heat, with the highest quality insulation that's a bone-warming 50% better than polystyrene, the Dual Wall is King where cabin comfort's concerned. With 70mm of weather fighting, high density foil backed foam sheets sandwiched between its sturdy timber this modern solution will make you want to move in permanently.

For your Log Cabin we recommend a solid concrete base to footprint size plus 100mm all the way round, for example:

• A Rhine 4m x 3m would need a base approximately 4200mm wide x 3200mm deep.
  
• For a Rhine 4m x 3m plus 1.5m veranda the base would need to be approximately 4200mm wide x 4700mm deep.
  
• For a 9m x 3m Tamar Grande the base would need to be approximately 9200mm wide x 3200mm deep.
  
• These sizes are the minimum sized base needed for these particular cabins.
  

Standard Carsare A Dual Wall Specification:

EXTERNAL SIZE - 3.5m (11'6") wide x 3.5m (11'6") deep (approx).

INTERNAL SIZE - 3.04m (10'0") wide x 3.04m (10'0") deep (approx).

160mm INSULATED WALLS The dual wall log cabin has a 45mm external wall and a 45mm internal wall with 70mm polyurethane insulation between them. The insulation is foil backed to reflect and retain heat.

FLOOR 19mm tongue and groove floor boards for a sturdy floor.

ROOF 19mm tongue and groove roof timbers to create a sturdy roof.

 

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

INTERNAL EAVES 2110mm (6'9") (approx) High, the lowest point inside, giving plenty of interior space (this means you won't bang your head!)

FRENCH DOOR Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock and TOUGHENED DOUBLE GLAZING. The French Door is provided in 6 assembled pieces that fit together then slot into place.

3 LARGE DOUBLE GLAZED WINDOWS Made with TOUGHENED glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic. (Please Note: Windows and Doors require on site glazing)

FLOOR BEARERS 70mm x 70mm Pressure treated floor bearers that sit underneath the log cabin to protect its foundations from damage by insects and fungal decay. Without pressure treated bearers moisture would damage the lower aspects of the cabin!

ROOF BEAMS Heavy duty 140mm x 45mm to prevent 'sagging'.

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!

After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.

We supply you with all nails and screws needed for the assembly of your log cabin.

Look at our Testimonials!!!