Our Avon 3 Grande XL is unparalled in quality and design. The cabin is designed to be the ideal size for both leisure and comercial use, whether it be a large summer house to relax in or a quiet, comfortable and professional office to work and liase with clients in without the inconvenience and relatively high cost of building an extension, moving house or renting office space. Our standard designs will satisfy virtually any requirements and represent a combination of quality and value. All our cabins are manufactured from sustainable resources.

For your Log Cabin we recommend a solid concrete base to footprint size plus 100mm all the way round, for example:

• A Rhine 4m x 3m would need a base approximately 4200mm wide x 3200mm deep.
  
• For a Rhine 4m x 3m plus 1.5m veranda the base would need to be approximately 4200mm wide x 4700mm deep.
  
• For a 9m x 3m Tamar Grande the base would need to be approximately 9200mm wide x 3200mm deep.
  
• These sizes are the minimum sized base needed for these particular cabins.
  

Standard Avon 3 Grande XL Specification:

EXTERNAL SIZE 3m (9'10") wide x 11m (36' 2") deep (approx).

INTERNAL SIZE Room 1: 2.8m (9'4") wide x 2.8m (9'4") deep Room 2 and 3: 2.8m (9'4") wide x 3.97m (13'1") deep (approx).

3 ROOMS

WALLS 28mm tongue and groove walls with bevelled notches for easy assembly and a better seal compared to straight cut notches.

FLOOR 19mm tongue and groove floor boards for a sturdy floor.

ROOF 19mm tongue and groove roof timbers to create a sturdy roof.

 

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

INTERNAL EAVES 2010mm (6'6") (approx) High, the lowest point inside, giving plenty of interior space (this means you won't bang your head!)

CANOPY 1m (3'3") (approx.) deep canopy creating a porch area over the doors. Perfect for shade in the summer and cover from the elements in the winter.

FRENCH DOOR (2 internal, 1 external) - Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock. (Note: Door aesthetic may differ from that shown) The French Doors are provided in 6 assembled pieces that fit together then slot into place.

2 INTERNAL DOUBLE DOOR To be cut in at your desired position along the dividing wall.

WALK THROUGH HEIGHT 1650mm

5 WINDOWS Made with glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic. (Note: Window aesthetic may differ from that shown)

DOUBLE GLAZING Optional extra - * for improved Heat & Sound Insulation. ( see options below )

FLOOR BEARERS 70mm x 70mm Pressure treated floor bearers that sit underneath the log cabin to protect its foundations from damage by insects and fungal decay. Without pressure treated bearers moisture would damage the lower aspects of the cabin!

ROOF BEAMS Heavy duty 140mm x 45mm to prevent 'sagging'.

STORM PROTECTION BEAMS provided to secure the top wall section to the lower sections of the wall.

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!

After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.

We supply you with all nails and screws needed for the assembly of your log cabin.

Look at our Testimonials!!!

Important: must be read

click on image to enlarge
An example of how your log cabin is supplied
(photograph shows Severn Log Cabin Pack)