Keep your horse warm, dry, safe, and happy with the Tipperary™ Stable. All timbers are pressure treated, except for OSB boarding, using Tanalith 'E' which is better at preventing rot and insect infestation than untreated natural timbers or colour dipped timbers. The Louvre windows ensure that the stable remains well ventilated whilst security bars on the windows and a heavy duty door with secure shootbolts and latch keep your horse safe. Guttering and Water Butt are included to drain away and store rainwater which can then be used to clean the Stable.

The flexibility of the Stable design means it can be erected in many different variations, so you can have a stable built to suit you. Door hinges are reversible and the wall panels can be constructed with the doors/windows on either the left or right side of the stable.

For your Stable we recommend a solid concrete base to footprint size plus 100mm all the way round, for example:

• A Tipperary™ 3.6m x 3.6m would need a base approximately 3800mm wide x 3800mm deep.
  
• For a 3.6m x 3.6m Tipperary™ with 6' Tack Room the base would need to be approximately 5600mm wide x 3800mm deep.
  
• These sizes are the minimum sized base needed for these particular stables.
  

Standard Tipperary™ Stable Specification:

EXTERNAL SIZE 4.3m (14'1") wide x 3.6m (11'10") deep (approx).

CLADDING - 15mm thick finish x 120mm shiplap, which is less likely to curl than 150mm timber. (ex 19mm x 125mm) Pressure Treated Timber. (Most companies only quote nominal sizes, so make sure to check the finish size)
FRAMING - ex 75mm x 40mm Pressure Treated Timber. Double Framing for Extra Rigidity, giving you more timber than a 100mm x 50mm section.
KICK BOARD - Walls half lined to 1250mm high with 18mm OSB Boarding.

ROOF - Corrugated Bitumastic material.

BASE PLINTH - ex 75mm x 75mm Pressure Treated Timber with water resistant treatment to prevent water ingress. Sealed underneath and bolted down to the concrete, No course of bricks need laying.

ROOF PURLINS 140mm x 145mm finished (ex 150mm x 50mm), the BIGGEST available on Stables (to our knowledge). Spaced at 600mm apart, held in place with passivated steel angle brackets.

INTERNAL EAVES - 2450mm (8'1") (approx) High, the lowest point inside, giving plenty of interior space.
RIDGE HEIGHT - 3350mm (11'1") (approx) High.

CANOPY 1.2m (3'10") (approx.)deep canopy to create an area of shade and shelter outside the front of the stable.

HEAVY DUTY STABLE DOOR - Overall dimension 1200mm x 2290mm, with a Walkthrough of 1180mm x 2290mm (approx). Shoot Bolts and Kick over Latch. The door is hung on its own 90mm x 45mm Frame, not on the stable framing, with Heavy Duty 24" Galvanised Hinges. Fully Lined with OSB Boarding, Anti-chew strip on top of Lower Door Sash. Doors can be hung either left or right.

VIEWING WINDOW - 400mm x 500mm Perspex Glazed with internal Galvanised bars. Sliding Shutter over Window.

LOUVRE WINDOWS - 3 Fixed Louvre Windows for ventilation, underneath the canopy to prevent rain ingress.

BOLTS - 10mm plated steel bolts, 1 per every 4' length of wall.

GUTTERING to front elevation leading into a 100 ltr Water Butt for cleaning out the stable. Optional Guttering is available for the rear of the Stable.

Look at our Testimonials!!!

Important: must be read