EXTERNAL SIZE 12m (39'4") wide x 5.5m (18') deep (approx).

OVERALL INTERNAL SIZE 11.77m (38'7") wide x 5.27m (17'3") deep (approx).

WALLS 45mm Double Tongue & Groove Walls.

ROOF 19mm Tongue & Groove Roof Timbers to create a sturdy roof with attractive ceiling.

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

INTERNAL EAVES 2400mm (7'10") (approx) High

3 METAL GARAGE DOORS 2000mm wide x 2000mm high (approx) at front, plenty of room to fit a car through (Available in 7 colours).

PREMIUM SINGLE SOLID SIDE DOOR for easy access to your garage/workshop.

PREMIUMPLUS SINGLE SOLID SIDE DOOR (Optional Extra) - This is an extra tall Single Solid Door, fitted with a 6 pin Euro cylinder, a contemporary chrome handle and heavy duty easy-adjust hinges.

SINGLE DOOR WALK THROUGH HEIGHT 1980mm 6’6”(from floor)

SINGLE DOOR OVERALL FRAME HEIGHT 2110mm 6’11”(from floor)

2 PREMIUM WINDOWS Made with glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic.

2 PREMIUMPLUS WINDOWS (Optional Extra) - Units are fitted with 28mm Toughened Glass Double Glazing (4mm unit, 20mm space, 4mm unit), which is thicker than any other level of glazing available on the log cabins market and so more thermal efficient. PremiumPlus™ Windows are provided with a Multi-Point locking system, with mushroom headed espagnolette locks. (Please Note: Windows and Doors require on site glazing)

DOUBLE GLAZING Optional extra - * for improved Heat & Sound Insulation. ( see options below )

WALL BEARERS 70mm tall Pressure Treated wall bearers that sit round the edge of the garage to protect its foundations from damage by insects and fungal decay. Without pressure treated bearers moisture would damage the lower aspects of the cabins!

ROOF BEAMS Heavy Duty to help prevent 'sagging'.

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!

After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.

With our Log Cabins, we supply you with all nails and screws needed for assembly. Click here to see how one of our Log Cabins arrives.

Look at our Testimonials!!!

CABIN SIZES - Please be aware that all Dimensions and Calculations are approximate figures.

Important: must be read

Compare us to our Competitors!

We have measured to ensure that even a Mitsubishi Shogun fits into our Trent^® Treble Garage.

• Please Note: Window and door aesthetic may differ from the pictures shown.
  
• Please Note: When purchasing, please be sure to specify which colour door you would like , in the 'Additional Notes' section of the Shopping Basket during the Checkout Phase (The available colours are shown above in the Image Section).
• Please note: We will require at least two people provided by the customer to help offload the metal garage doors, due to their weight. Approximate weight 70kg.

If you wish to use concrete, it is recommended that you take your log cabins size and add 100mm all the way round to calculate the size of the base required, for example:

• A 4m x 3m would need a base approximately 4200mm wide x 3200mm deep.
  
• For a 4m x 3m plus 1.5m decking the base would need to be approximately 4200mm wide x 4700mm deep.
  
• For a 9m x 3m the base would need to be approximately 9200mm wide x 3200mm deep.
  
• These sizes are the minimum sized base needed for these particular cabins.