• External Size - 3m (9'10") wide x 5m (16'5") deep (approx).
• Internal Size - 2.8m (9'2") wide x 4.8m (15'9") deep (approx).
• Walls - 28mm tongue and groove walls with bevelled notches for easy assembly and chamfered ends for an attractive finish.
• Floor - 19mm tongue and groove floor boards to create a sturdy and attractive floor.
• Floor insulation - 25mm foil backed polyurethane board that sits under the floor boards.
• Roof - 19mm tongue and groove roof boards for a sturdy roof with an attractive ceiling.
• Roof insulation - made with 50mm polyurethane, goes on top of roof boards to give your log cabin an overall roof thickness of approximately 80mm.
  

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

• Internal Eaves - 2000mm (6'6") (approx) High, the lowest point inside, giving plenty of interior space (and you don't have to worry about knocking your head!)
• Canopy - 1.1m (3'6") (approx.) deep canopy that provides some shelter and shade at the front of your log cabin.
• French Door - Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock.
• Bi-folding shutters on doors - add privacy when closed and fold so that they take up less space when opening. Doors open outwards so the shutters are fitted to the inside of the cabin.
• 3 Windows at side of cabin.
• Window shutters - Add an element of privacy to your log cabin. As the windows open outwards, shutters are fitted to the inside of the log cabin. (Please Note: Shutters do not fully fold back)
• 14mm TOUGHENED DOUBLE GLAZED sealed units supplied, to be fitted into window and doors, (Please Note: onsite glazing required).
• 3 Flower Boxes - enable you to add a decorative finishing touch.
• Floor Bearers - 70mm x 70mm Pressure treated floor bearers that sit under the log cabin to protect the lower aspects from fungal decay and damage by insects or moisture.
• Roof Beams - Heavy duty 140mm x 45mm to prevent 'sagging'.
• All wood is planed, pre-cut (with the exception of trims), and pre-notched for easy assembly. Click here to see how easy it is!
• After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.
• We supply you with all nails and screws that you will need for the assembly of your log cabin.
• Look at our Testimonials!!!

Important: must be read

click on image to enlarge
An example of how your log cabin is supplied
(photograph shows Severn Log Cabin Pack)