External Size:
5m (16'5") wide x 4m (13'2") deep + 1.1m (3'6") canopy (approx)

Walls - 130mm Insulated; Floor - 44mm Insulated; Roof - 80mm Insulated
Don’t like Mondays? Find somewhere fetching to do the filing with the Severn^® 4 TripleTherm™ Walls Log Cabin Office.
This exquisite outdoor work station inspires a booming business right there amongst the begonias with all the style, space and convenience your executive head could hope for. Let the soothing mood of real wood ease you into another day at the office and pity those rat-race runners that would give their annual rail card for such scenic views, top grade amenities and truly charming chalet venue.

The TripleTherm™ Walls Office boasts superior roof and floor insulation plus fully double- glazed windows for storing warmth and minimising sound. Tight, interlocking logs produce an extremely sturdy structure that’s comprised of not one but two 28mm wall layers with foam and aluminium foil sandwiched intelligently in between. Such expert insulation makes your office akin to the skin of a penguin, keeping all the warmth inside without the need for excessive heating when the weather’s less than temperate - yet still reflecting surplus warmth to keep you cool and collected on days when the Heat Is On.

Fully opening windows, roof lights, and large French doors serve to aerate your cabin as needed, creating a corporate sanctuary that’s beautiful, bright and as fresh as the daisies it sits upon. Throw in a mug of extra strength coffee and you might even find it’s worth getting out of bed for.
(Though we won’t make any bold promises.)

Take a look at the story of how our log cabins are manufactured.

For your Log Cabin we recommend a solid concrete base to footprint size plus 100mm all the way round, for example:

• A Rhine^® 4m x 3m would need a base approximately 4200mm wide x 3200mm deep.
  
• For a Rhine^® 4m x 3m plus 1.5m decking the base would need to be approximately 4200mm wide x 4700mm deep.
  
• For a 9m x 3m Tamar^® Grande the base would need to be approximately 9200mm wide x 3200mm deep.
  
• These sizes are the minimum sized base needed for these particular cabins.
  

Standard Severn® 4 130 TripleTherm™ Walls Office Specification:

EXTERNAL SIZE 5m (16'5") wide x 4m (13'2") deep (approx).

RIDGE HEIGHT - 2.5m or 2.7m. Cabin can be assembled to accommodate both heights.

INTERNAL SIZE 4.6mm (15'2") wide x 3.6m (11'10") deep (approx).

130mm INSULATED WALLS The TripleTherm Walls log cabin has a 28mm external wall and a 28mm internal wall with 70mm polyurethane insulation between them. The insulation is foil backed to reflect and retain heat.

FLOOR 19mm tongue and groove floor boards for a sturdy floor.

FLOOR INSULATION 25mm foil backed polyurethane board that sits underneath the floor boards.

ROOF 19mm tongue and groove roof timbers to create a sturdy roof and attractive ceiling.

ROOF INSULATION made with 50mm polyurethane, goes on top of the roof boards to create a cabin with an over all roof thickness of approximately 80mm.

 

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

INTERNAL EAVES 2050mm (6'7") (approx) High when assembled at the Taller Height and 1900mm (6'2") (approx) when assembled at the Lower Height. These measurements are the lowest point inside the cabin, giving plenty of interior space (this means you won't bang your head!)

CANOPY 1.1m (3'6") (approx.) deep canopy ideal for providing shade from the sun and shelter from the rain.

FRENCH DOOR Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock. The French Door is provided in 6 assembled pieces that fit together then slot into place.

2 WINDOWS Made with glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic.

TOUGHENED DOUBLE GLAZING 14mm sealed units are supplied for you to place in the window and doors. (onsite glazing required)

2 GLASS SKYLIGHTS (double glazed) - For added light and ventilation. Will need to be cut into the log cabin roof in your desired position, allowing you to place it wherever best suits your requirements.

FLOOR BEARERS 70mm x 70mm Pressure treated floor bearers that are resistant to rot and insect infestation. Without pressure treated bearers moisture would damage the lower parts of the cabin!

ROOF BEAMS Heavy duty 140mm x 45mm to prevent 'sagging'.

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!

After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.

We supply you with all nails and screws needed for the construction of your log cabin.

Look at our Testimonials!!!

COMPARE our specification to our Competitors!

Important: must be read

click on image to enlarge
An example of how your log cabin is supplied
(photograph shows Severn Log Cabin Pack)