Sometimes it’s the small things that send us over the edge.
The Avon 5 28 Grande Vantage + won’t take your problems away but it will coax you out of your rut and into the freedom of a fresh new perspective.

So next time you feel it’s all getting a bit too much simply recharge your batteries in this backyard bolthole with enough mod cons to keep you cosy all year ‘round.

Take a look at the story of how our log cabins are manufactured.

For your Log Cabin we recommend a solid concrete base to footprint size plus 100mm all the way round, for example:

• A Rhine 4m x 3m would need a base approximately 4200mm wide x 3200mm deep.
  
• For a Rhine 4m x 3m plus 1.5m veranda the base would need to be approximately 4200mm wide x 4700mm deep.
  
• For a 9m x 3m Tamar Grande the base would need to be approximately 9200mm wide x 3200mm deep.
  
• These sizes are the minimum sized base needed for these particular cabins.
  

Standard Avon 5 28 Grande VANTAGE+ Specification:

EXTERNAL SIZE 3m (9'10") wide x 9m (29'7") deep (approx).

INTERNAL SIZE Room 1: 2.8m (9'2") wide x 4.8m (15'9") deep, Room 2: 2.8m (9'2") wide x 3.8m (12'6") deep (approx).

2 ROOMS

WALLS 28mm tongue and groove walls with bevelled notches for easy assembly and a better seal compared to straight cut notches.

FLOOR 19mm tongue and groove floor boards for a sturdy floor.

FLOOR INSULATION 25mm foil backed polyurethane board that sits under the floor boards.

ROOF 19mm tongue and groove roof boards for a sturdy roof with an attractive ceiling.

ROOF INSULATION made with 50mm polyurethane, goes on top of roof boards to give your log cabin an overall roof thickness of approximately 80mm.

 

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

INTERNAL EAVES 2010mm (6'6") (approx) High, the lowest point inside, giving plenty of interior space (this means you won't bang your head!)

CANOPY 1.1m (3'6") (approx.) deep canopy. Perfect for shade in the summer and cover from the elements in the winter.

FRENCH DOOR Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock. The French Door is provided in 6 assembled pieces that fit together then slot into place.

DOOR SHUTTERS add privacy when closed and fold so that they take up less space when opening. As doors open outwards the shutters are fitted to the inside of the cabin.

INTERNAL DOUBLE DOOR To be cut in at your desired position along the dividing wall.

WALK THROUGH HEIGHT 1650mm

5 WINDOWS Made with glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic.

WINDOW SHUTTERS Add an element of privacy to your log cabin. Shutters are fitted to the inside of the cabin as windows open outwards. (Please Note: Shutters do not fully fold back).

TOUGHENED DOUBLE GLAZING 14mm sealed units supplied, to be fitted into window and doors, (Please Note: onsite glazing required).

FLOWER BOXES For added decoration

FLOOR BEARERS 70mm x 70mm Pressure treated floor bearers that sit underneath the log cabin to protect its foundations from damage by insects and fungal decay. Without pressure treated bearers moisture would damage the lower aspects of the cabin!

ROOF BEAMS Heavy duty 140mm x 45mm to prevent 'sagging'.

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!

After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.

We supply you with all nails and screws needed for the assembly of your log cabin.

Look at our Testimonials!!!

Important: must be read

click on image to enlarge
An example of how your log cabin is supplied
(photograph shows Severn Log Cabin Pack)