• External Size - 4m (13'2") wide x 7m (23') deep (approx).
• Internal Size - Room 1: 3.8m (12'6") wide x 2.8m (9'2") deep, Room 2: 3.8m (12'6") wide x 3.8m (12'6") deep (approx).
• 2 Rooms
• Walls - 28mm tongue and groove walls with bevelled notches for easy assembly and a better seal compared to straight cut notches.
• Floor - 19mm tongue and groove floor boards for a sturdy floor.
• Floor insulation - 25mm foil backed polyurethane board that sits under the floor boards.
• Roof - 19mm tongue and groove roof boards for a sturdy roof with an attractive ceiling.
• Roof insulation - made with 50mm polyurethane, goes on top of roof boards to give your log cabin an overall roof thickness of approximately 80mm.
  

Note: We only use tongue and groove timbers for our floor and roof not OSB sheet timber! (We only use MFP board on top of roof insulation, which will usually not be seen as it will have a roof covering over it).

• Internal Eaves - 2000mm (6'6") (approx) High, the lowest point inside, giving plenty of interior space (this means you won't bang your head!)
• Canopy - 1.1m (3'6") (approx.) deep canopy. Perfect for shade in the summer and cover from the elements in the winter.
• French Door - Made with rebated door panels (for a more attractive appearance) and fitted with a secure lock.
• Bi-folding shutters on front doors - add privacy when closed and fold so that they take up less space when opening. As doors open outwards the shutters are fitted to the inside of the cabin.
• Internal double door - To be cut in at your desired position along the dividing wall.
• 5 Windows - Made with glass, not Perspex. We use glass as it is clearer and much easier to clean than clear plastic.
• 14mm TOUGHENED DOUBLE GLAZED sealed units supplied, to be fitted into window and doors, (Please Note: onsite glazing required).
• Window shutters - Add an element of privacy to your log cabin. Shutters are fitted to the inside of the cabin as windows open outwards. (Please Note: Shutters do not fully fold back).
• Flower Boxes for added decoration
• Floor Bearers - 70mm x 70mm Pressure treated floor bearers that sit underneath the log cabin to protect its foundations from damage by insects and fungal decay. Without pressure treated bearers moisture would damage the lower aspects of the cabin!
• Roof Beams - Heavy duty 140mm x 45mm to prevent 'sagging'.
• All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction. Click here to see how easy it is!
• After simple assembly windows slot into place. Minor adjustments will have to be carried out on windows well within the scope of a competent DIYer.
• French Door is provided in 6 assembled pieces that fit together then slot into place.
• We supply you with all nails and screws needed for the assembly of your log cabin.
• Look at our Testimonials!!!

• Window can be positioned on either the left or right side of the Log Cabin.
• Veranda - 1.5m deep (approx), consists of two banisters and pressure treated flooring and bearers.
• Additional windows and doors are available.
• Roof Shingles - Weather proof the roof of your log cabin with the addition of attractive roof shingles.

Important: must be read

click on image to enlarge
An example of how your log cabin is supplied
(photograph shows Severn Log Cabin Pack)